User Menu Options
Page 51
Event Actions
In a partitioned system, press
or
to scroll through
each partition, and
or
to select No (no action), Full
(full set), Part (part set) or Unset.
In a part-setting system, select one of: Full Set, Part Set
B (or C or D) or Unset.
Event Exceptions
Choose the exceptions (set up using
Add Exception
)
that you want to apply to the event.
Press
or
to scroll through the list of programmed
exceptions. Press
or
to specify Yes (the exception
applies to the event) or No.
Warning Time
Specify the period (in minutes) you want the control unit
to sound the warning tone before the start of a setting
event. Enter between 1 and 30 minutes. The default is
10. There is no specific warning indication for an unset
event.
The warning tone sounds at the keypads and
loudspeakers allocated to the partition(s) specified in
the event.
At the beginning of the warning time, the control unit
activates any outputs of type Autoset Warning.
At the end of the period, the control unit stops the
warning tone, sets the affected partition(s) without any
delay and deactivates any outputs of type Autoset
Warning.
Warning Tone
Press
or
to choose between Audible or Silent.
When Silent, the control unit will NOT sound a warning
tone for the event (although the warning timer will still
operate).
If a warning tone is due from more than one event at the
same time, and any of the tones is set to "Audible", the
tone will be audible.
Edit Event
Use
System Config
– Calendar Set – Edit Event
to edit individual parts of
an event.
Delete Event
Use
System Config
– Calendar Set – Delete Event
to delete an event.
