Eaton i-on16, Руководство администратора и пользователя

Страница: 61 / 92

i-on16 4. Administration
Page 55
Once you have selected the Walk Test option you want to use:
The display shows a list of all the
detectors ready for testing. The top
line of the display shows you how
many detectors remain to be
tested.


10. Walk round and trigger each detector.
The display shows an "A" at the end of
the line each time a detector is
triggered. If you have enabled the
Chime then every time you trigger a
detector the keypads and
loudspeakers give a double tone
chime.
Note that you cannot test HUA, 24
hour or fire zones.


11. Press if you want to see a list of
the zones that remain to be tested:


12. Press

to end the test.
The control unit leaves walk test
mode and the bottom line of the
display shows the option you were
using.


Outputs
1. Make sure the display shows the
standby screen.


2. Press .


3. Key in your access code (or
present a tag).


4. Press

until you see:.


5. Press

.
The display shows:

