Eaton i-on16, Руководство администратора и пользователя

Страница: 14 / 92

1 Introduction i-on16
Page 8
The reason for this is that an installer may connect several detectors
together to guard one “zone” (an area of a building for example). The
control unit cannot tell that this has happened, so it is easier for the keypad
to report an alarm from a “zone”. Most of the time there is only one detector
per zone, especially with radio detectors.
Users
Types of User
The control unit provides for five different types of user:
Master User This user can add other users to the system, edit them, or
remove them. There is always (at least) one master user: User 01. Master
users can create all other user types, including other master users. No user
can remove User 01 or change their type.
Normal User This user cannot add or delete other users. A normal user
can change their own access code, switch the Chime function on and off,
and operate any outputs that the installer has made available.
Guard A guard can only unset the system when in alarm, reset it, and then
set the system (or part of it) again. A guard cannot change their access
code.
Set Only This type of user can set the system, but cannot unset the
system. A set only user cannot change their access code.
Duress Code A duress code can set or unset the system, but whenever a
user employs a duress code the control unit notifies the alarm receiving
centre. The Installer must program your system to provide this feature, and
you must agree with your alarm installer and the ARC what action the ARC
should take on receiving a duress message. A duress code cannot have a
remote or prox tag, or any access to the user menu.
For details on how to add and remove users see page 34 .
Identifying Users
The control unit identifies each user internally by a unique number in the
range 01 to 16. When a Master User adds or edits other users the keypad
shows user numbers
as “User nn”, for example “User 01” or “User 15”.
To help Master Users identify other users the control unit allows each user
to have a 12 character name. The Master User keys in the name when
adding the user to the system. If a user has a name on the system, then
the control unit shows that name on the keypad when the Master User is