Eaton i-on1000EX, Руководство по установке

Страница: 9 / 40

i-on1000EX Before You Begin
Page 5
1. Case back.
2. Cable entry holes for
loudspeakers, siren/strobes and
communicators.
3. Fixing holes.
4. Plastic PCB tray.
5. Printed Circuit Board (PCB).
6. Cable entry holes for detector
and keypad wiring.
7. Hole for back tamper fitting.
8. Space for batteries (two of).
9. Mains cable anchor point.
10. Cable entry hole for mains.
Figure 2 Control Unit
1. Plug by output connectors.
2. USB socket (Mini B).
3. Panel location sounder.
4. Lid tamper connector.
5. Reset Codes pins.
6. Engineering keypad connector.
7. Bus connectors (10 of).
8. Aux power output.
9. Bus pair activity LED (one per bus pair).
10. Bus termination pins (1 per bus)
11. Bus activity LEDs (two per bus)
12. Output connectors. 13. Kickstart pins (Batt 1 only).
14. Battery connectors (two of).
15. 20Vac connector.
16. Bell and strobe connector 2.
17. Bell and strobe connector 1.
18. Connectors for loudspeakers and aux
tampers (2 of)
19. Ethernet activity.
20. Ethernet socket.
21. Heartbeat LED.
22. Sockets for plug on module.
23. Plug on Comms activity LED.
Figure 3 Control Unit Printed Circuit Board