Eaton i-on1000EX, Руководство по установке

Страница: 6 / 40

Introduction i-on1000EX
Page 2
partitions (although it is recommended that each
zone belongs to only one partition, simply to make
the resulting system easier to program).
Each partition can have a full-set level and one
part-set level. In full set, the control unit pays
attention to all detectors. In part set, the control
unit ignores detectors that do not have the Part
Set attribute.
During installation, you can allocate keypads,
sounders or outputs to any partition.
For a detailed description of the Installer’s
programming menu, please read
the Engineering
Guide available from www.coopersecurity.co.uk.
Installer Programming Interface
Once fitted and powered up, you can program the
control unit through any wired keypad connected
to the bus cable. The Installer menu allows you to
specify all the operating parameters for an
individual installation.
If you wish, you can also program the system from
a PC or laptop connected to the Ethernet port on
the control unit PCB. The control unit contains a
web page server, and you can use any web
browser to see a complete version of the Installer
menu. Please see the
Web Server Setup Guide
for more instructions.
Note that
Eaton’s Security Business recommend
using Internet Explorer. Other browsers may not
be fully compatible with the built-in web browser
interface.
In addition, it is possible to connect a PC or laptop
to the mini USB port on the control unit PCB and
use
Eaton’s Security Business Downloader
software to program the control unit.
Note: Some programming options can make the
installation non-compliant with EN50131. The
relevant options are noted in
the “Installer Menu”
section of the Engineering Guide .
About this Guide
This guide shows the simple procedure required
to physically install the control unit, connect
keypads, expanders and power supplies and
power up the system for the first time.
When you have completed the physical
installation, please consult the
Engineering Guide
for details of configuring the system to meet your
customer’s requirements. For your convenience,
page 29 of this installation guide contains a
condensed reference table of the Installer menu.