Eaton Hydrokraft PVW 250, Руководство по эксплуатации

Страница: 34 / 36

Maintenance and repair
33
HYDROKRAFT OPERATION MANUAL PVW 250+360
E-PUIO_II001-E April 2021 www.eaton.com
8. Maintenance and repair
8.1 Cleaning and care
IMPORTANT
Damage caused by solvents and aggressive detergents
Aggressive detergents maybe damage the seals and
surface on the Hydrokraft pump.
Please do not use solvents and aggressive detergents.
A high-pressure cleaner can also damage the unit
8.2 Inspection
In order to have a long and reliable life time of the axial
piston unit,
Eaton Germany GmbH recommends the inspection of the
Hydrokraft pump and the hydraulic System.
Inspection schedulee:
Task:
interval
Hydraulic system check level of hydraulic
fluid in the tank
daily
check operating
temperature
daily
check quality of the
hydraulic fluid
after 3000h
check filter weekly
Hydrokraft pump check Hydrokraft pump for
leakage
daily
check Hydrokraft pump for
not allowed noice
daily
check fixing elements for
tight seating
monthly
8.3 Maintenance
If the Hydrokraft pump are used under recommended
conditions maintenance requirements will be low. The life
time of the Hydrokraft unit is depending on the fluid quality.
Oil change intervals are depending on operation
conditions and may vary between 3000h and 16000h
Depending on operation conditions.
The life time of the Hydrokraft pump is limited by service
life of the build-in bearings. Life time of bearings can be
requested based on load cycle from Hydrokraft technical
support. Adjustment and maintenance points must be
located outside danger zones.
8.4 Repair
Eaton Germany GmbH provides a complete range of
service and repair.
If it is required Eaton Germany GmbH can provide a
complete offer for service and repair.
Repairs during the warranty period must be made by
EATON or authorized service stations only, otherwise
warranty claims will not be accepted.
Adjustment, maintenance, repair, cleaning and mainte-
nance work must be performed by trained personnel.
Only original Hydrokraft spare parts have to be used.
The availability of spare part kits shown on our spare parts
lists.
IMPORTANT
Damage to persons and property due to faulty
spare parts!
Spare parts which are not meeting specifications by
Hydrokraft may cause damage to person and property.
To ensure a fast response to inquiries and that the correct
spare parts are supplied, always provide the model code,
part no. and the serial no. as shown on the name plate.
If it is possible to get photos (included name plate) of the
pump it would be helpful.
Serial number
V*****
Short form
model code
Part number
Contact:
Eaton Germany GmbH
Am Joseph 16
D-61273 Wehrheim
Phone: +49 (0) 6081 103 0 (switchboard)