Eaton Hydrokraft PVW 250 Скачать руководство пользователя страница 18

Страница: 18 / 36

Transport and storage

HYDROKRAFT OPERATION MANUAL PVW 250+360

E-PUIO_II001-E April 2021 www.eaton.com

4. Transport and storage

4.1 Packaging and transport

•

Remove cardboard boxes, wooden boxes, foil,

fixing material

•

Proper disposal in accordance with the

national directives

•

Transport damages must be immediately announced to

the carrier

•

Due to the large dimensions and mass of Hydrokraft

pumps, adequate lifts and sling gears must be used for

installation and transport

•

The general safety instructions must be respected

when transporting!

•

Piping and pump or other installations must not be

used as sling gears

•

Always transport Hydrokraft pumps without hydraulic

medium. Due to the production test carried out by the

manufacturer, oil residues might be in the product

4.1.1 Health risk and risk of damage

•

Health Risk: Never stand or walk under

suspended loads!

•

Risk of Damage: Hard hits to pump and especially

shaft can damage the pump (especially bearings can be

pre-damaged)

Never set or place pump on the drive shaft!

Never use hammer or similar tools to mount coupling

on drive shaft!

•

Ensure that lifting device (fork lift truck or similar) has

adequate lifting capacity!

•

Ensure that lifting straps/chains or ring screws has

adequate lifting capacity and are without damage!

4.1.2 Dimensions and weights

Estimated weights for basic pumps with DF,LR,ST,SP and

DP control, without aux.pumps

Model

PF/VW

130/180

PF/VW

250

PF/VW

360

PF/VW

500

PF/VW

750

Mass

kg 130/140 212

220

340

395

Please be aware that mass can vary depending on pump

options significantly.

For exact mass data contact your Eaton Hydrokraft

Technical Support team or weight pump separately

before lifting.

For dimension information please have a look in

appropriate documentation (installation drawing,

product catalogue)

4.1.3 Transport with lifting straps or chains

Hydrokraft PVW pumps with SP, DP or ES control are

foreseen to be transported with lifting straps or chains.

Please use appropriate lashing lugs provided together

with pump.

4.1.4 Transport with ring screw

Hydrokraft PVW pumps with DF, LR or ST control are fore-

seen to be transported with lifting straps or chains. Please

use appropriate ring screw provided together with pump.

Содержание Hydrokraft PVW 250





































Результаты поиска

Содержание Hydrokraft PVW 250

Отзывы:

Бренды по названию

Популярные бренды

Eaton Hydrokraft PVW 250, Руководство по эксплуатации

Результаты поиска

Содержание Hydrokraft PVW 250

Отзывы:

Бренды по названию

Популярные бренды