13
GREEN MOTION DC 22 EV CHARGER USER MANUAL
MN192003EN October 2022 www.eaton.com
7. Maintenance
It is mandatory to install and maintain the units with the latest system updates to enable new features and bug
fixes, or the guarantee conditions may be voided.
For units that are online, this must be done via the Eaton Charging network manager software platform.
Please refer to the Eaton Charging network manager user manual, available on
www.eaton.com
, for further
details. For units that are offline, please contact your Eaton service representative using the email address
.
Installation, commissioning, maintenance or retrofitting of the EV charger must be performed by professional
and qualified personnel who are responsible for complying with existing standards and local installation
regulations.
Before starting connection operations, make sure that the external AC-line main switch is disconnected, and
circuit breakers are open.
Any operation requiring the opening of the housing of the EV charger can lead to electric shock hazards.
In case the unit shows a failure and the emergency stop button is pushed, check the integrity of the unit,
cables and connectors before starting the maintenance process.
The opening of the EV charger as well as any configuration changes must be carried out by a professional and
qualified personnel in accordance with the local safety and electrical regulations and laws.
Before carrying out any maintenance on the unit, disconnect the unit from the power supply and wait at least
ten minutes to allow its components to cool down and any static electricity storage devices to discharge.
The enclosure could overheat during its operation or be heated by direct sunlight, and it can cause burns by
contact. To avoid burns, please use suitable PPE or wait for the equipment to cool down before accessing it.
7.1 How to put the unit as out of order
The unit can be set as out of order in two ways:
1. On-site method: Press the emergency stop button.
2. Remote method: Access the Eaton Charging network manager and set the unit as out of order.
7.2 Station updates
