Connecting the expansion unit
For more information visit:
www.EatonElectrical.com
MN05013005E
47
Connecting the expansion
unit
Figure 28: Connecting expansion units
Terminals
Tool for cage clamp terminals
Slot-head screwdriver, width 3.5
×
0.6 mm.
Connection cross-sections of the EZD cage clamp
terminal cables
• Solid: 0.2 to 4 mm
2
(AWG 24 -12)
• Flexible with ferrule: 0.2 to 2.5 mm
2
(AWG 24-12)
Tool for slot-head screws for EZ expansion unit
Slot-head screwdriver, width 3.5
×
0.6 mm, tightening torque
0.6 Nm. (5.3in.lb)
Connection cross-sections of screw terminal cables
• Solid: 0.2 to 4 mm
2
(AWG 22 - 12)
• Flexible with ferrule: 0.2 to 2.5 mm
2
(AWG 22 -12)
