Eaton EVT-300, Инструкции для водителя

Страница: 29 / 34

26
In Case of an Accident
Accident Reconstruction Capability (Optional)
The Accident Recorder can store two segments of system data in the system’s
non-volatile memory. The first of the two segments may be stored by pushing
and holding the “RANGE” knob on the Driver Display Unit for approximately
five (5) seconds. Within six (6) seconds, the green “S/C” light will blink eight
times, confirming storage of the data (see Figure 11). Subsequent pushing of
the “RANGE” knob will cause the system to respond with a “FAIL” tone. After
the first segment is frozen, the second segment runs continuously recording
system data until the system is powered down.
The system’s Central Processing Unit must be returned to Eaton Corporation
to download and interpret the recorded data in the non-volatile memory. This
must be done before 30 days have elapsed, or the event will be removed from
the system memory. Before shipping the unit contact the Eaton Corporation at
1-800-826-HELP (4357). After confirmation, ship the Central Processor Unit
to Eaton Corporation, Attn: Accident Reconstruction Specialist, 13100 E.
Michigan Ave., Galesburg, MI 49053.
Figure 11
FAIL
ON S/C
Warning Level Range
Volume
Driver Identification
Card Slot
Alerts
Range Control/
Accident Recorder
EATON VORAD