Eaton ePDU Скачать руководство пользователя страница 26

Warranty

Eaton Advanced ePDU Troubleshooting Guide    P-164000140—Rev 1    

www.eaton.com/ePDU

21

Customer Service Engineer or Agent; (e) improper testing, operation, maintenance, adjustment or modification 
of any kind not authorized in writing by Company personnel or performed by an authorized Company Customer 
Service Engineer or Agent; or (f) use of the Product under other than normal operating conditions or in a manner 
inconsistent with the Product’s labels or instructions.

This Warranty is not valid if the Product’s serial numbers have been removed or are illegible. Any Warranted 
Items repaired or replaced pursuant to this Warranty will be warranted for the remaining portion of the original 
Warranty subject to all the terms thereof.

Company shall not be responsible for any charges for testing, checking, removal or installation of Warranted 
Items.

COMPANY DOES NOT WARRANT EQUIPMENT NOT MANUFACTURED BY COMPANY. IF PERMITTED BY 
THE APPLICABLE MANUFACTURER, COMPANY SHALL PASS THROUGH SUCH MANUFACTURER’S 
WARRANTIES TO END-USER.

COMPANY DOES NOT WARRANT SOFTWARE (IF APPLICABLE TO THE PRODUCT), INCLUDING 
SOFTWARE EMBEDDED IN PRODUCTS, THAT IS NOT CREATED BY COMPANY. WITHOUT LIMITING THE 
FOREGOING, COMPANY SPECIFICALLY DOES NOT WARRANT SOFTWARE (SUCH AS LINUX) THAT WAS 
CREATED USING AN “OPEN SOURCE” MODEL OR IS DISTRIBUTED PURSUANT TO AN OPEN SOURCE 
LICENSE.

THIS WARRANTY IS THE SOLE AND EXCLUSIVE WARRANTY OFFERED BY COMPANY WITH RESPECT TO 
THE PRODUCTS AND SERVICES AND, EXCEPT FOR SUCH FOREGOING WARRANTY COMPANY 
DISCLAIMS ALL OTHER WARRANTIES INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF 
MERCHANTABILITY, TITLE, NON-INFRINGEMENT AND FITNESS FOR A PARTICULAR PURPOSE. 
CORRECTION OF NONCONFORMITIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED 
ABOVE SHALL CONSTITUTE COMPANY’S SOLE LIABILITY AND ENDUSER’S EXCLUSIVE REMEDY FOR 
FAILURE OF COMPANY TO MEET ITS WARRANTY OBLIGATIONS, WHETHER CLAIMS OF THE END-USER 
ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE OR STRICT LIABILITY), OR OTHERWISE.

LIMITATION OF LIABILITY: The remedies of the End-user set forth herein are exclusive and are the sole 
remedies for any failure of Company to comply with its obligations hereunder. In no event shall Company be 
liable in contract, in tort (including negligence or strict liability) or otherwise for damage to property or 
equipment other than the Products, including loss of profits or revenue, loss of use of Products, loss of data, 
cost of capital, claims of customers of the End-user or any special, indirect, incidental or consequential 
damages whatsoever. The total cumulative liability of Company hereunder whether the claims are based in 
contract (including indemnity), in tort (including negligence or strict liability) or otherwise, shall not exceed the 
price of the Product on which such liability is based.

Company shall not be responsible for failure to provide service or parts due to causes beyond Company's 
reasonable control.

END-USER'S OBLIGATIONS: In order to receive the benefits of this Warranty, the End-user must use the 
Product in a normal way; follow the Product’s user’s guide; and protect against further damage to the Product 
if there is a covered defect.

OTHER LIMITATIONS: Company’s obligations under this Warranty are expressly conditioned upon receipt by 
Company of all payments due to it (including interest charges, if any). During such time as Company has not 
received payment of any amount due to it for the Product, in accordance with the contract terms under which 
the Product is sold, Company shall have no obligation under this Warranty. Also during such time, the period of 
this Warranty shall continue to run and the expiration of this Warranty shall not be extended upon payment of 
any overdue or unpaid amounts.

Содержание ePDU




























Отзывы: