background image

ELC-COPBDP

 

MN05006003E               For more Information visit: 

www.eaton.com

                                    1 

 

Introduction 

3

 This is an OPEN-TYPE device and therefore should be installed in an enclosure free of airborne 

dust, excessive humidity, shock and vibration. The enclosure should prevent non-maintenance 

staff from operating the device (e.g. key or specific tools are required to open the enclosure) to 

avoid potential equipment damage or personal injury. DO NOT touch any terminal when the power 

is switched on.   

3

 Please read this manual carefully and follow the instructions to avoid damage to the product or 

personal injury. 

 

 

 

Table of Contents 

 

1

 

Introduction............................................................................................................................ 2

 

2

 

Specification .......................................................................................................................... 2

 

3

 

Product Profile and Outline.................................................................................................. 3

 

4

 

Installation and Wiring .......................................................................................................... 4

 

5

 

Application Description ........................................................................................................ 6

 

 
 
 

Microsoft® and Windows Internet Explorer® are the registered trade mark or trade mark 
of Microsoft Corporation in the United States and other countries. 

Java® is the registered trade mark or trade mark of Sun Microsystems, Inc. in the United 
States or other countries. 

The companies and products mentioned in this operation manual can be the trade mark 
possessed by the owner of that trade mark right.

Содержание ELC-COPBDP











Отзывы: