Document:
EG2-NA 9850-000225-02
Eaton Lighting Systems
Usk House, Lakeside, Llantarnam Park,
Cwmbran, NP44 3HD. UK
T: +44 (0)1923 495495 F: +44 (0)1923 228796
E: [email protected] EatonLightingSystems.com
iLight Support
(International)
20 Greenhill Crescent,
Watford Business Park,
Watford, Herts,
WD18 8XG. UK
T: +44 (0)844 324 9100
(available Mon-Fri 9am-5pm GMT)
www.iLight.co.uk
iLumin Support
(North America)
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
(Canada)
5925 McLaughlin Road
Mississauga, Ontario L5R 1B8
P: 905-501-3000
www.eaton.com/lighting
All products manufactured by Eaton Lighting Systems and identified with the iLight or iLumin
product series mark are warranted to be free from defects in material and workmanship and shall
conform to and perform in accordance with Seller’s written specifications.
This warranty will be limited to the repair or replacement, at Seller’s discretion, of any such goods
found to be defective, upon their authorized return to Seller. This limited warranty does not apply
if the goods have been damaged by accident, abuse, misuse, modification or misapplication, by
damage during shipment or by improper service.
There are no warranties, which extend beyond the hereinabove-limited warranty,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE
IMPLIED WARRANTY OF FITNESS.
No employee, agent, dealer, or other person is authorised to give any warranties on behalf of the
Seller or to assume for the Seller any other liability in connection with any of its goods except in
writing and signed by the Seller. The Seller makes no representation that the goods comply with
any present or future federal, state or local regulation or ordinance. Compliance is the Buyer’s
responsibility.
The use of the Seller’s goods should be in accordance with the provision of the National Electrical
Code, UL and/or other industry or military standards that are pertinent to the particular end use.
Installation or use not in accordance with these codes and standards could be hazardous.
!
WARNING HAZARDOUS VOLTAGES
DISCONNECT FROM SUPPLY
BEFORE REMOVING COVERS
NO USER SERVICEABLE PARTS INSIDE
SERVICE BY QUALIFIED PERSONNEL ONLY
WARNING
To reduce the risk of fire or electric shock,
DO NOT expose this device to rain or moisture.
DO NOT energise unless the front cover is in place.
This device must be earthed.
Installation, programming and maintenance must be carried out by qualified personnel.
Eaton Lighting Systems cannot accept responsibility for repairs or modifications that are not
competently executed and in accordance with service or upgrade information.
CE compliant to all relevant standards
