Warning -
Intellectual Property Rights
Eaton wishes to make it clear that it owns intellectual property rights in the
product which it manufactures (whether or not listed in this leaflet) and that it
will take legal action against any party found to be manufacturing, using, or
selling any article which infringes the company’s intellectual property. All
marks in this document identified with an R symbol or a TM symbol adjacent
to the mark are trademarks of Eaton.
© 2020 Eaton Electric Limited.
All rights reserved. www.eaton.com/recycling
The use to which this product is put and its place of installation is outside our
control. Particular care should therefore be taken to follow the instructions
given here and to ensure their continued availability in conjunction with the
use of the product.
No responsibility can be accepted by us if these instructions are disregarded.
Further copies of these instructions and information concerning the
installation and proper use of this product can be obtained by contacting the:
Technical Services Department
Eaton Electric Limited, Middleton, Manchester, M24 1GQ.
Tel: +44(0)8700 545 333,
email: [email protected]
Maximum Thermal Ratings
Maximum Incomer
125A Switch = 125A
FED FROM
______________________________________________________
CONTRACTOR
______________________________________________________
INSTALLATION DATE
_______________________________
INCOMING CABLE SIZE
_______________________________
nc
Maximum Outgoer
I RDF
AFDD 40A (6kA) = 40A 0.75
AFDD 25A (10kA) = 25A 0.75
MAIN BUSBAR CIRCUITS
