Eaton DXRT 10KS31-IN Series, Руководство пользователя

Страница: 95 / 98

94
Fault code: F207
Fault lamp lights long,
Beep continuous.
Bypass fault Please contact your supplier
Fault code: A00E
Fault LED is flash
1 beep every 1 second
In parallel system
，
parallel cable
disconnect
Check if the parallel cable
connect OK.
Fault code: A012,
AC18
Fault LED is flash
1 beep every 1 second
Parallel system
，
UPS1
line ok
，
UPS2 line loss
Check the line input
Fault code: A00F,
AC19
Fault LED is flash
1 beep every 1 second
Parallel system
，
UPS
mode
（
normal
，
converter
，
HE
）
different
Check UPS OP mode, Keep OP
mode be the same
Fault code: F811
Fault lamp lights long,
Beep continuous.
Negative output power Please contact your supplier
Fault code: F00E
Fault lamp lights long,
Beep continuous.
parallel cable
disconnect
Check if the parallel cable
connect OK.
8.2 Silencing the alarm
Press the ESC (Escape) button 3s on the front panel display to silence the
alarm. Check the alarm condition and perform the applicable action to
resolve the condition. If the alarm status changes or press the ESC button
3s on the front panel display, the alarm beeps again, overriding the
previous alarm silencing.