Eaton DXRT 10KS31-IN Series, Руководство пользователя

Страница: 73 / 98

72
The following table describes the information of UPS status.
Note: If other indicator appears, see troubleshooting on chapter 7.2 for
more information.
Operation status Cause Description
Standby mode The UPS is Off. UPS is operating without output.
Online mode The UPS is operating
normally.
The UPS is powering and protecting the
equipment.
Battery mode
1 beep every 4
seconds
A utility failure has
occurred and the
UPS is on Battery
mode.
The UPS is powering the equipment with
the battery power.
Prepare your equipment for shutdown.
High Efficiency
mode
The UPS is
operating on High
Efficiency mode.
Once the mains are loss or abnormal,
the UPS would transfer to Line mode or
Battery mode and the load is supplied
continuously.
1. The function could be enabled
through the LCD setting or the software
(Winpower, etc.)
2. It is reminded that the transfer time of
UPS output from HE mode to battery
mode is about 10ms. But it is still too
long for some sensitive load.
Bypass mode Overload or fault has
occurred, or a
command has been
received, and the
UPS is in Bypass
mode.
Equipment is powered but not protected
by the UPS.
Warning There are some
abnormal problems
during the operation
of UPS. Normally
the problems are not
fatal
The UPS continues working, but please
pay attention to the warning, or the UPS
may fail.