P
3
Document 9850-000521-00
Scene Selection
To select a scene press one of the buttons identified by either a number,
indicated by a specific legend or that is blank.
To turn lights off press the button marked Off or O on button only panels or
the light bulb symbol on control panels fitted with the ‘On, Off, Raise and
Lower’ button set.
To raise the level of scene press (when fitted).
To lower the level of scene press (when fitted).
Control wiring
The DALI Control Panel is provided with 2 x polarity-free wires used to connect to the DALI line.
Standard Recommended DALI cabling: 2-core cable of minimum gauge 1.5 mm
2
.
The total cable distance: 300m.
2 x polarity-free wires
The front cover plate should only be cleaned gently with a clean, damp
cloth. Abrasive cleaners, polishes, solvent based cleaning agents, or alkali
based cleaners should not be used.
‘Scene Only’
control panel
example
Control panel
fitted with ‘On,
Off, Raise, Lower’
button set
Care and Maintenance
Typical DALI line schematic
DALI Bus
iCANnet
SOURCE CONTROLLER
SCMD4
DALI DINRAIL
SOURCE CONTROLLER
DALI
CONTROL
PANEL
CONTROL
PANEL
DALI
MULTI
SENSOR
DALI
DAC
0-10V VDC
DALI
DIMMABLE
BALLAST
DALI
RELAY
CONTROLLER
Max. 64 devices
per DALI loop.
Max. length 300M
1.5mm2 cable
