P
4
Document 9850-000521-00
iLight Series
Eaton Lighting Systems
20 Greenhill Crescent, Watford Business Park
Watford, Herts, WD18 8JA. UK
T: +44 (0)1923 495496
F: +44 (0)1923 228796
www.iLight.co.uk
Technical Support
For technical support contact your local installer or distributor
T: +44 (0)844 32 49 100
E: [email protected]
International Headquarters
Usk House, Lakeside, Llantarnam Park,
Cwmbran, NP44 3HD. UK
T: +44 (0)1923 495495
F: +44 (0)1633 867880
www.eatonlightingsystems.com
[email protected]
All products manufactured by Cooper Controls Ltd and identified with the iLight brand are warranted to be free from de
-
fects in material and workmanship and shall conform to and perform in accordance with Seller’s written specifications.
For detailed warranty information, visit our website at www.coopercontrol.com
This warranty will be limited to the repair or replacement, at Seller’s discretion, of any such goods found to be defective,
upon their authorised return to Seller. This limited warranty does not apply if the goods have been damaged by accident,
abuse, misuse, modification or misapplication, by damage during shipment or by improper service.
There are no warranties, which extend beyond the hereinabove-limited warranty, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS.
No employee, agent, dealer, or other person is authorized to give any warranties on behalf of the Seller or to assume
for the Seller any other liability in connection with any of its goods except in writing and signed by the Seller. The Seller
makes no representation that the goods comply with any present or future federal, state or local regulation or ordinance.
Compliance is the Buyer’s responsibility.
The use of the Seller’s goods should be in accordance with the provision of the National Electrical Code, UL and/or other
industry or military standards that are pertinent to the particular end use. Installation or use not in accordance with these
codes and standards could be hazardous.
!
WARNING HAZARDOUS VOLTAGES
DISCONNECT FROM SUPPLY
BEFORE REMOVING COVERS
NO USER SERVICEABLE PARTS INSIDE
SERVICE BY QUALIFIED PERSONNEL ONLY
WARNING
To reduce the risk of fire or electric shock,
DO NOT expose this device to rain or moisture.
DO NOT energise unless the front cover is in place.
This device must be earthed.
Installation, programming and maintenance must be carried out by qualified personnel.
Cooper Controls cannot accept responsibility for repairs or modifications that are not
competently executed and in accordance with service or upgrade information.
CE compliant to all relevant standards
DALI Control Panel
Installation guide
