![background image](http://html1.mh-extra.com/html/eaton/cutler-hammer-qs4500te0001/cutler-hammer-qs4500te0001_quick-start-instructions_4024926003.webp)
QS4500TE0001
Page 3
Effective 6/01
Figure 3 Vertical Power Panel
Figure 4 Horizontal Power Panel
Step 3: Turn generator OFF at the Generator Control
Panel. This will prevent unexpected activation of the
generator.
Step 4: Connect Engine Generator Control to
Terminals 51, and 52 (Red) (Figure 5). This contact is
CLOSED whenever the engine generator is needed,
and should be connected to a generator controller.
NEVER connect directly to a starter solenoid or ignition
system.
Figure 5 Engine Start Contact Location
Tighten Cables Into Terminals
See Detail
B
Detail
B
Typical
Engine Start Contacts
(Red Terminals)