![background image](http://html1.mh-extra.com/html/eaton/cutler-hammer-d64rpy2-a1-series/cutler-hammer-d64rpy2-a1-series_instruction-manual_3862196006.webp)
INSTRUCTION
MANUAL
D64RPY2
D64RPY2 SERIES A1 DIGITAL GROUND FAULT RELAY
Pub. No. IM-
D64RPY2
Ser. A1, August, 2002
Page 6
Output Relay:
Contacts:
Maximum UL rating:
8 A @ 250 V ac, general use
8 A @ 30 V dc, resistive
TV-5
1/4 hp, 250 V ac (motor load)
600 W, 120 V ac (tungsten)
2 A, 530 VA, @ 265 V ac, pilot duty
43.2 VA, @ 30 V dc, pilot duty
22 LRA, 3.6 FLA, 30 V dc
Isolation voltage .................................................................. 3 kV rms, 50-60 Hz, 1 min.
Between open contacts ........................................................1 kV rms, 50-60 Hz, 1 min.
Between coil and contacts ...................................................2 kV rms, 50-60 Hz, 1 min.
Configuration ...................................................... Voltage free form "C" N.O. – C – N.C.
Operating Mode ....................................................................................................... Pulsed Auto Reset
Functional Test:
A simulated current of 600 milliamps (120% of 500 milliamp factory set trip current) replaces
the measured current. This tests all internal electronics and secondary winding of the built-in
current transformer. No external power supply or additional wiring is required.
Remote Test ................................................ Press Test button connected to Blue and Purple wire leads
Reset mode ................................................................................................................ Pulsed Auto Reset
Ground Fault Circuit:
Ground Fault Trip Time Delay (factory set).............................................................. 500 milliseconds
Accuracy ............................................................................................................................
±
10%
Ground Fault Trip Current Level (factory set) ............................................................... 500 milliamps
Accuracy .......................................................................... +0%, -15% of 500 milliamps @ 60 Hz
Note:
The accuracy of the trip point refers to the value of the real world current
(assuming a purely sinusoidal wave shape) that just causes a trip at
500milliamps.
Frequency Response Range ............................................................................................45 - 450 Hz
Environment:
Operating Temperature........................................................................................-35
°
C to +60
°
C
Storage ................................................................................................................-40
°
C to +80
°
C
Humidity .................................................................................................85% (No Condensation)
Shock resistance ..................................................................................................... 10G (no malfunction)
Vibration resistance ....................................10G, 10-55 Hz at 1.5 mm double amplitude (no malfunction)
Dimensions (refer to Figure 2):
Height.....................................................................................................................2.68" (68 mm)
Width (including mounting bracket) .......................................................................2.05” (52 mm)
Width (not including mounting bracket) .................................................................1.38" (35 mm)
Depth .....................................................................................................................3.23" (82 mm)