Eaton AT-1202 Скачать руководство пользователя страница 72 | Manualshive

Страница: 72 / 82

background image

69

Inertia Brake

Generation 3 - Inertia Brake Relocation Instructions - Heavy-Duty



(8 to 6-Bolt PTO Opening)

CAUTION

Oil may be hot.

Note:

Drain the lubricant from the transmission. Drain the lubricant from the Inertia Brake. On older product the Inertia Brake will

still remain full of lubricant (no drain plug).

Removal

1.

Disconnect the Transmission Harness from the Inertia Brake and remove tie straps restraining this harness branch.

Note:

Use care not to damage the harness. Protect the connector end from dirt contamination.

2.

Disconnect the lubricant supply line from the Inertia Brake.

CAUTION

The Inertia Brake is heavy. Be prepared to handle the weight of the Inertia Brake when the mounting bolts are removed. Protect
the connector body from impact and contamination.

3.

Remove the six (6) mounting bolts from the Inertia Brake.

4.

Remove the Inertia Brake and gasket from the adapter plate.

5.

Remove the eight (8) mounting bolts from the adapter plate.

6.

Remove and discard the adapter plate and gasket from the transmission.

7.

Remove the six (6) mounting bolts from the 6-bolt PTO cover.

8.

Remove and discard the 6-bolt PTO cover and gasket from the transmission.

Note:

Clean and remove all old gasket material from the mating surfaces of the Inertia Brake and transmission PTO openings.

Locate the harness push-in anchor point for reference during re-installation to 6-bolt opening.

For spec’ing or service assistance, call 1-800-826-HELP (4357) 24 hours a day, 7 days a week, (Mexico 8-332-1515) for



more time on the road. Or visit our website at www.roadranger.com.

NOTICE TO PERSONS RECEIVING THIS DRAWING AND/OR TECHNICAL INFORMATION:



Eaton claims proprietary rights to the material disclosed hereon. This drawing and/or technical information is
issued in confidence for engineering information only and may not be reproduced or used to manufacture anything
shown or referred to hereon without direct written permission from Eaton to the user. This drawing and/or technical
information is the property of Eaton and is loaned for mutual assistance to be returned when its purpose has been
served.

THIS DRAWING AND/OR TECHNICAL INFORMATION IS THE PROPERTY OF EATON.

«
...
70
71
72
73
74
...
»

Содержание AT-1202



















































































Отзывы:

Нет отзывов

Похожие инструкции для AT-1202

Бренд: UnionSpecial Страницы: 56

Бренд: Cannon Страницы: 40

Бренд: NARGESA Страницы: 34

Бренд: Hagie Страницы: 141

Бренд: Taylor Страницы: 41

Бренд: Pahlen Страницы: 20

Бренд: Paia Страницы: 7

Бренд: Pari Страницы: 282

HQ Power VDL25BM

Бренд: Velleman Страницы: 3

Бренд: iGuzzini Страницы: 36

AQUIS ULTRAFLOW

Бренд: Waterous Страницы: 56

Quadro A Legs 3P 120 Degree Workstation with...

Бренд: Jason.L Страницы: 10

Бренд: Jäger Страницы: 36

Бренд: IMG STAGE LINE Страницы: 12

Add-It AFI 5016-H

Бренд: DIG Страницы: 2

Бренд: Ace Страницы: 37

Бренд: Next Sight Страницы: 55

Бренд: GE Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды