Eaton 9SX 15KPMAU Series, Руководство пользователя

Страница: 119 / 128

113
•
UPS UPS works in battery mode, and the buzzer beep for 4 seconds to
remind that the battery is discharged. To cancel the alarm, see 7.3.4
Setting
→
General
•
Since there is no utility power input, the input abnormal alarm will be
displayed on the LCD.
7.4.2 UPS Shutdown
Shutdown the UPS with utility power mode:
•
UPS working with utility power, press the button for more than 3s, the
LCD pops up to confirm the shutdown page;
•
After clicking Confirm, the UPS performs shutdown;
•
After shutdown, the UPS works in bypass mode and the output remains
powered;
•
If there is no need the UPS output, disconnect the input utility power.
Shutdown the UPS with battery mode:
•
Press the button for more than 3s, the LCD pops up to confirm the
shutdown page;
•
After clicking Confirm, the UPS performs shutdown;
•
The UPS output is interrupted and goes into standby mode. After a few
seconds, the UPS automatically shuts down.
7.4.3 UPS function
•
Working mode
Mode Break time Output frequency PF correction
Line mode 0ms
Follow the input within
the allowed range
Yes
High efficient mode 10ms Fully follow the input No
ESS efficient mode 2ms Fully follow the input No
CVCF mode 0ms Fixed 50Hz/60Hz Yes
•
Automatically restart/Restart battery
After the battery is exhausted, when the utility power is restored, the UPS will
enter the bypass mode and charge the battery. When the user setting turns on
the automatic restart function, and the battery reaches the set restart battery
power, The UPS will automatically restart.