Eaton 10000H, Руководство пользователя

Страница: 41 / 61

９
4.3
Installation for 1000H(XL)/ 2000H(XL)/ 3000H(XL):
1) UPS Connection:
1.1) Input Connection
If the UPS is connected via the power cord, please select a proper socket with
protection against current, and pay attention to the capacity of the socket: over
10A for 1000H(XL)/2000H, over 16A for 2000HXL/3000H(XL).
1.2) Output Connection
The output of 1000H(XL) and 2000HXL (Non CE) are socket-types only. Simply
connect the load to the UPS output sockets to complete connection.
Model No.
Output Socket (pcs) Terminal Block
1000H(XL) 4 Nil
2000H 6 Nil
2000HXL 4(CE) 6(Non CE) Available(CE) Nil (Non CE)
3000H(XL) 4(CE) 3(Non CE) Available
Besides output sockets, 2000HXL (CE) and 3000H (XL) models also feature an output
terminal block. The wiring configuration is shown below:
a) Remove the small cover of the terminal block.
b) Use AWG14 or 2.1mm2 wires for wiring configuration. Suggested replacement:
Use appropriate cable rated according to local wiring codes, please refer to the
table in Page 9 for maximum cable size.
c) Upon completion of the wiring configuration, please check whether the wires are
securely fixed.
d) Put the small cover back to the rear panel.
Connection diagram of 2000HXL(CE) and 3000H(XL)
1.3) Computer Connection:
Connect your computer to the outlet sockets of the UPS system following the
above diagram.
Caution!
*Do not connect equipment which would overload the UPS system (e.g. laser printers)