EAT F-Note, Инструкция по эксплуатации

Страница: 6 / 14

6
SETUP
1. EAT FORTE / FORTE S INSTALLATION
a) Dissassembling of standard EAT flange
Carefully remove the platter from the bearing shaft and put it on the safe place. Turn the
turntable on the side so that the screws which holds standard tonearm flange can be reached.
Remove 4 screws (M6 x 55) from the bottom as shown in the followint illustration.
b) Assembling EAT F-Note with own flange
Place the F-Note tonearm with new own flange over the hole in the chassis. By using longer
screws (recommended screw are M6 x 70), tighten the new flange on the chassis.