15
14
B. Automatic User Identification
After you have programmed your information and weighed yourself once,
your EatSmart Precision Body Check scale will automatically recognize you
by your weight and automatically pull up your personal data profile. After
you have programmed your user and weighed yourself once, the scale
will automatically recognize you for future weigh-ins. It does this based
upon the weight of the user (it will detect all profiles /- 6.6 lbs/ 3
kgs). There is no need to reprogram any information or manually select a
memory number if this is done correctly, except if you have lost or gained
6.6 lbs (3 kgs) from your last weigh-in.
1.
Step on the platform directly with bare feet to turn
the scale on. Position your feet evenly with maximum
contact with the metal electrodes.
2.
Stand still while the scale measures your weight.
3.
Your weight will display for 2 seconds, and then the scale will begin to
estimates your body composition. The screen shows a moving zeros
pattern (“
oooo
”) while estimating. Continue to stand still on the scale.
4.
If there is only one user profile whose last weight reading is close to the
person being weighed, the scale will select that user’s memory number
automatically. The body composition estimates will then display twice
before the scale turns off.
5.
If there is more than one user profile whose
weight is close to the person being weighed
(- 6.6 lbs.), both memory numbers will
appear on the screen before the scale starts to
estimate body composition.
For example:
Step off the scale. Press the “
s
” or “
t
” button to select memory number
P1 or P2. Wait for the screen to show “
0.0
”. Step back on the platform
with bare feet, positioning your feet evenly on the scale platform with
maximum contact with the metal electrodes.
Stand still while the scale measures your weight. Your weight will
display for 2 seconds, and then the scale will begin to estimates your
body composition. The screen shows a moving zeros pattern (“
oooo
”)
while estimating. Continue to stand still on the scale.
The body composition estimates will then display twice before the
scale turns off.
Note:
For automatic user identification to work you must first select a
profile, input your profile data and measure your weight at least once.
If a user profile isn’t automatically located, please re-do steps 1 and 2
carefully or call for support.
