7
6
1. BMI Readout
2. Body Fat % Reading
3. Body Water % Reading
4. Muscle Mass % Reading
5. Bone Mass % Reading
6. Cal-Pal™ Daily Calorie / Basal Metabolic Rate (kcal)
7. Athlete Mode Icon
8. Male Icon
9. Female Icon
10. Height Displayed in Feet/Inches
11. Weight Readout in Kilograms (kg)
12. Weight Readout in Pounds (lb)
13. Weight Readout in Stone (st)
14. POWER Button
15.
s
Forward Button
16.
t
Back Button
17. SET Button
LCD READOUT & BUTTON DESCRIPTION
POWER
• Turn the scale on and off
SET
• Confirmation button for selection
s
or
t
• Changes value of height, age and activity level, toggle between Male / Male athlete and
Female / Female athlete in Body Fat function
• Select memory P1 - P8 in Memory mode & Recall mode
• Recall settings of memory locations
FUNCTION KEYS
BACK VIEW
Battery
Compartment
Battery Installation and First Time Setup
1.
This scale operates on 3 'AAA' batteries. Batteries are included and located in the
underside of the cardboard packing insert. Remove any plastic wrap from the
batteries before installation. Remove any screws and open the battery cover on the
back of the scale unit. Place the batteries into the battery compartment according
to the “
+
” and “
-
” polarity symbols at the bottom of the compartment. Replace the
battery compartment cover and screw(s).
Always replace all batteries at the same time: do not combine old and new
batteries. Do not mix Alkaline, Carbon-Zinc (standard) or Nickel-Cadmium
(rechargeable) batteries.
Remove the batteries if the scale will not be used for a long period of time.
OPERATION
TIPS
Replace batteries when
"
Lo
" is displayed.
Direction of the 3 AAA batteries
2.
Set units of measurements. Your scale is set at the factory to weigh in pounds (lb).
Press the “kg lb st” button on the bottom of the scale to switch to kilogram (kg) or
stone (st) units of measurement. (1 stone = 14 pounds.)
3.
Some models have a static cling label on the LCD lens to prevent scratching. Remove
before use.
4.
Place the scale on a hard, flat surface. Carpeted, uneven or cushioned flooring can
negatively affect the accuracy of the reading. When in doubt, call 866-843-3905 (8 to
5 MST).
5.
The scale needs to be initialized and calibrated before first use and after moving your
scale. Place the scale on flat, hard surface. The harder the surface the more accurate
your readings will be. Carpeting or uneven floors may affect accuracy. Avoid soft
flooring like Pergo™ or types of linoleum. Firmly press on the glass platform to
activate the backlight, but do not stand on the platform. Allow the scale to read '
0.0
'
and wait for it to turn off. Your scale is now calibrated and ready for use. If you
move the scale, or replace the batteries, repeat step #5 to calibrate again.
