4
Safety Precautions
For your safety:
1 Do not store or use gasoline or other flammable vapours or liquids in the vacinity of this or
any other appliance
2 A gas cylinder not connected for use should not be stored in the vicinity of this or any other
appliance
Leakage Test
Gas connections on the appliance are leak tested prior to shipment Possible mishandling of the
appliance during shipment can damage the integrity of some parts
Do
NOT
use a naked flame to test for leaks
A complete gas leakage test must be performed again at the installation site Please follow the
procedure below for leakage test
1 It is advised to make a soap / liquid detergent and water solution to identify any holes/splits
or loose fittings in the tube
2 Make sure the control tap is in the
OFF
position on the control panel
3 Apply the solution to the hose using a brush or rag
4 Turn
ON
the gas supply and check for bubbles from the hose If the air bubbles appear this
indicates a leak in the hose
5 If a leak is present, turn
OFF
the gas supply immediately, tighten or replace any leaking fitting
carefully, turn gas again and recheck
Safety Precautions
• Performance and safety service of this appliance should be performed annually by a
qualified gas engineer
• Do not use the heater in a combustable atmosphere
• Do not store or use petrol or other flammable liquids in the oven unit
• Before using the unit check the whole gas system ie hoses for splits, twists which may cause
gas to leak or prevent flow
• The recommended frequency of checking the tubing or the flexible hose is at least once per
month and each time the cylinder is changed If it shows signs of cracking, splitting or other
deterioration it should be changed for new hose of the same length and of the equivalent
quality
• Disconnect gas cylinder before moving the oven
• Do not attempt to modify any parts of the appliance
• The appliance is not recommended to be used in basements, below ground level or in areas
with limited / no ventilation
