make the printing platform fall to the standard distance, (check the distance is right
or not .that is, when drawing A4 sheet, the nozzle should be attached to the A4
sheet without scratching it).
c), do the same way to adjust another
2,3,4,
three points
。
d), When the distance between the nozzle and the platform all is right distance in
1,2,3,4, four points, leveling finished and succeed.
Please turn on the power again after platform leveling
（
2
）
Load Filament , feed
(a),Insert filament into the print head tube until it can not go further,and gently
press the filament to stop it runs back.
(b),Click
button,the button light turn on and flash
，
the nozzle is heating ,
Please be patient and wait about 2 minutes
, the machine begin
