QUICK START GUIDE
３
|
P a g e
3
UNPACKING AND INSTALLATION
1. Open the packing box and check if it is sealed.
2. Unwrap the packing box to take out the manual
and check if the accessories are complete.
3.Take out the top accessory box and then take out 3D
Printer. Remove all packing foam and put printer on a level
table.
4.Take out the foam inside the printer
5. Put the
glass-reinforced epoxy laminate sheet
into the platform
6. Fix the material holder on the hole at the back of the 3D
printer with the screws. Take out the printing Filament and
hang them on the material rest.
Rocker arm
