QUICK START GUIDE
９
|
P a g e
Q4, There has lots of filament piled up on the model surface,
A1, nozzle temperature is too high, consumables melt too fast to cause overflowing .
A2, The filament flow is too large, Software has filament flow settings, the general default value is 100%. Please down it
to 80% printing.
Q5, Poor surface after removing the support of FDM printing technology.
A1, The support can be set up to the 10% density. Then its easy to remove the support.
A2, can be slightly trimmed with a grinding tool, and then rubbed with a towel which dipped into acetone. Note to Wear
gloves, do not wipe too long so could avoid affecting the appearance and size of the model.
Q6, The inappropriate distance between the platform and nozzle.
The first layer is not formed
because of large distance,
if the distance is too small, the nozzle will scratch
the
platform, . The distance between the nozzle and the platform must be adjusted to get through a calibrate film.
Q7. Printing supplies difference:
With the maturity of 3D printing, FDM printing supplies on the market is rich and multiple color, But the compatibility of
supplies and printers is particularly important.
Thank you for choosing EasyThreed 3D Printer!
Shenzhen EasyThreed Technology Co., Ltd.
Website: http://www.easythreed.com
Tel: 86-755-89882011
Address:
No. A2, 2nd Floor, Avant Low Carbon Innovation Park,
No1034 of Longgang Road, Pingdi Street, Longgang District, ShenZhen,China
