Easystreet Air Commander, Руководство пользователя

Страница: 8 / 10

8
Technical Support
1-800-248-0892
Ext. 2
Figure 18
Important Warranty Information
1. If the compressor or engine is run without having oil in the compressor, then the warranty
is void.
2. If the belt is misinstalled or the belt does not have the proper tension, then the warranty is
void.
3. Failure to use included installation components properly voids the warranty.
4. Failure to check proper oil level and conditions will void the warranty.
5. This compressor must only be used in an air compressor application only, not an air
conditioning application. No freon is required.
6. It is necessary to periodically check the filter for trapped oil. This needs to be performed
three or four times a year. Failure to do so will result in reduced component life.
X. Wiring the Electrical System
1. The hot lead to the compressor is the black wire on the clutch. Cut off the fitting on the end of the black wire and
using butt connector (ZZ), splice a length of the red wire (WW) to the black wire. Run red wire to spade terminal on
the pressure switch. Attach a blue spade connector (AB) to the red wire and attach to one of the terminals on the
pressure switch.
2. Splice the 20 amp fuse in the fuse box using the adapters provided into a hot keyed power source and run it to the
other terminal on the pressure switch.
3. After all hardware has been secured and oil level is within range, the system is now ready to operate. See Figure
18 for a finished installation.
4. We recommend purchasing a spare belt to carry in the vehicle in case of a belt failure.
5. Check all fittings and air line connections for leaks with a solution of
1
/
5
dish soap to
4
/
5
water in a spray bottle.