manualshive.com logo in svg

EasyStand Evolv, Руководство пользователя

Поделиться
Скачать
EasyStand Evolv Скачать руководство пользователя страница 5

page 37 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

                                   page 2

Safety Precautions

Safety Precautions 

•   If a user does not meet these specifications and has not been properly fitted by a qualified therapist or physician, Altimate  

 

 

Medical, Inc., does not recommend using the EasyStand. 

  
 

Evolv Medium - is designed to accommodate most individuals from 4’0”-5’6” (122-168 cm) and up to 200 lbs. (90 kg) 

 

Evolv Large - is designed to accommodate most individuals from 5’0”-6’2” (152-188 cm) and up to 280 lbs. (127 kg) 

 

Evolv XT - is designed to accommodate most individuals from 6’0”-6’10” (183-209 cm) and up to 350 lbs. (159 kg)

 

 

 

 

For more detailed specifications visit our website www.easystand.com

•   Altimate Medical, Inc., recommends consulting with a therapist or physician prior to starting a standing program. 
•   Check the EasyStand periodically ensure that all nuts, bolts and adjustable parts are tightened securely.
•  Never make adjustments to the EasyStand while a user is in the standing position. 
•   Never reposition the foot plates while a user is in the standing position. Consult with a therapist or physician for proper foot 
 

placement and angle. 

•  It is necessary to inspect the EasyStand Evolv at least weekly to ensure it is in safe operating condition. Pay particular attention for 
 

loose hardware. If the EasyStand is equipped with the optional Pow’r up lift please inspect the electrical cables for any wear and to 

 

ensure they are attached properly. Replacement of worn parts, major adjustments, or any other important corrections should be 

 

handled by an authorized dealer or service center. Only Altimate Medical, Inc., approved replacement parts should be used to ensure 

 

safety and performance. 

•  If the EasyStand is being used in the home environment, please inspect the unit prior to each use to ensure there is no damage or   
 

unexpected wear to the EasyStand that may have been caused unintentionally by pets, pests or children.  

•   If the unit was exposed to temperatures of less than 50˚F (10˚C), the unit must warm to room temperature before use.
•  Operating Conditions: Temperature: 41˚F (5˚C) -104˚F (40˚C), Relative humidity: 20% - 90% at 86˚F (30˚C), Atmospheric 
 

Pressure: 700 to 1060hPa.

•  Storage/Transport Conditions: Temperature: 14˚F (-10˚C) -122˚F (50˚C), Relative humidity: 20% - 90% at 86˚F (30˚C), 
 

Atmospheric Pressure: 700 to 1060hPa.

•  The EasyStand can be used at a maximum altitude of 3,050 meters (10,000 feet).
•  The expected service life of an EasyStand is considered 5 years under normal use conditions. Note: This may vary based upon use.

•   Use body weight to lower the seat. Do not use excessive force.
•   The EasyStand is for indoor use on level surfaces only.
•   Violently thrusting in the EasyStand may cause it to tip.  
•   Always put the rear casters and/or wheels in the locked position before transferring into the EasyStand. Use these locks to keep the  
 

EasyStand stationary.

•  The EasyStand Evolv meets EN12182:1999 (test standard) for strength, durability and tipping stability.
•  Please contact Altimate Medical, Inc., for relevant clinical data and literature, strength, durability and test results as applicable.
•   The EasyStand Evolv Electric Lift meets the requirements of IEC 60601-1 and 60601-2.*
•   Altimate Medical products are specifically designed to be used with Altimate Medical accessories and options. Unless otherwise 
 

noted, accessories and options from other manufacturers have not been tested by Altimate Medical and are not recommended for 

 

use with Altimate Medical products.

•  Product Modifications made without express written consent (including, but not limited to, modification through the use of 
 

unauthorized parts or attachments) are not recommended and will void the product warranty.   

•  The wheel lock on the mobile option is to keep the unit in place while transferring or standing stationary and it is not intended to be  
 

used as a dynamic brake to stop a rolling mobile unit.

 Caution: This equipment is designed to accommodate a range of users; therefore the unit has various adjustment slots and holes.  
 

Avoid placing fingers or other body parts in any of these areas.  

 
 Caution: While in use this equipment has various moving parts, familiarize yourself with the unit and avoid placing hands or fingers 
 

near any of these areas.  

 Caution: Advise bystanders to keep clear of the unit while in use.    
 

Caution: Do not use the EasyStand Evolv Mobile option on an incline, it is intended for level surfaces only. Doing so may cause the 

 

unit to tip.

 

* Evolv Pow’r Up Lift Option Only

!

!

!

!

Содержание Evolv













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды