EasyStand Evolv, Руководство пользователя

Страница: 20 / 44

page 17 page 22
Pow’r Up Lift Option
Recommended separation distances between
portable and mobile RF communications equipment and the EasyStand Evolv
The EasyStand Evolv is intended for use in an electromagnetic environment in which radiated RF disturbances are
controlled. The customer or the user of the EasyStand Evolv can help prevent electromagnetic interference by
maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the
EasyStand Evolv as recommended below, according to the maximum output power of the communications
equipment.
Rated maximum output
power of transmitter
150 kHz to 80 MHz 80 MHz to 800 MHz 800 MHz to 2 .5 GHz
Separation distance according to frequency of transmitter
d = 1.2
√
P
m
d = 1.2
√
P
d = 2.3
√
P
.12
.12 .23
.38
.38 .73
1.2
1.2 2.3
3.8
3.8 7.3
12
12 23
W
0.01
0.1
1
10
100
NOTE 1: At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and
reflection from structures, objects, and people.
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters
(m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output
power rating of the transmitter in watts (W) according to the transmitter manufacturer.
FIG . E
!
Activating the Mechanical Emergency Release
All Altimate Medical electric lift products are equipped with a
mechanical release to be used in emergency situations.
CAUTION: Using the emergency mechanical release as the
primary means to return to the seated position can cause
damage to the unit. Only use the mechanical release in emer-
gency situations.
FIG . E- The release allows the user to be lowered to a seat-
ed position in the unlikely occurrence of the battery losing
charge while the user is in a standing position. The actuator
only retracts if the release is pulled and there is weight on
the seat. The release is located on the left side of the seat
and is signified by a red tag with the word “EMERGENCY”.
1. To activate the emergency mechanical release pull out the
quick release pin located on the left side of the seat.
2. Squeeze the handle and if necessary, push down on the
seat.