page 27
page 12
Adjusting The Evolv
Foot Plates
Caution: Never reposition the foot plates while a
user is in the standing position.
FIG . G- Loosen the clamp connecting the foot
bracket to the seat post to adjust the foot plate
height and plantar/dorsi.
Position the height of the foot bracket so the
user’s knee is as close to the seat pivot as
possible. The femur should be resting on the
seat, at a slight downward angle.
Tighten the clamp securely.
Caution: Avoid placing fingers in the adjustment
slot.
FIG . H- The foot plates can be abducted in 4
different positions (toe out), by removing the bolt
underneath the front edge of the foot plate with
a hex wrench and lifting up and turning the
foot plate. Make sure the foot plate notch is
positioned in one of the four slots.* Place the
bolt back into the foot plate once the desired
position is reached.
*Available on the Evolv E3 if ordered with
multi-adjustable foot plates.
FIG. G
Adjusting the EasyStand Evolv
!
!
Knee pad
FIG . I- To adjust the knee pad depth, loosen the
ratchet handle and move into position. Tighten
ratchet handle when the desired position is
reached.
Position the knee pad so the user’s knee is
centered in the knee pad and only 2 fingers fit
between the back of the leg and the seat.
FIG. I
FIG. H
®
®
