EasyStand Bantam PT50001-1, Инструкция по сборке

Страница: 11 / 16

Page 8
21A. For the tray, remove the nut from the bolt on the tray
arm and discard the nut. Make sure all other
hardware stays on the bolt.
21B. Place the ratchet handle onto the bolt and tighten se-
curely. Repeat steps for the other side.
22. If you ordered the optional Shadow Tray, loosen the
ratchet handles on the side of the tray, flip the arms up
so they are lined up with the tray as shown and tighten
the ratchet handles. Insert the two tray arms into the tray
bracket on the bottom of the tray. One of the arms is lon-
ger than the other for easier installation (for information
on Shadow Tray adjustments see the Instructions for Use
Manual). The bolts on the arms are used as a stop for fu-
ture reference. Place the quick release pins into the holes
of the tray to secure into place.
23. For the Swing-Away Shadow Tray, the knobs are lo-
cated in the bag your manual came in, Place knobs onto
unit as shown, insert tray bracket and tighten securely.
Caution: After placing the tray into position, ensure the
ratchet handles on the side of the tray are tightened
securely.
24A
21A 21B