EasyStand Bantam PT50001-1, Инструкция по сборке

Страница: 10 / 16

18. If you ordered the 11”x19” Black molded tray, place
tray on the floor upside down as shown. The longer tray
arm will go on the right side, the short arm on the left side.
19A. Remove the four nuts from the mounting bolts on the
arms and discard, do not remove the acorn nut and bolt.
19B. With the acorn nut facing up, place the longer arm on
the right side of the tray, line up the two mounting holes.
Insert bolt, and tighten snug.
Page 7
20A. Place the second bolt into the hole.
20B. Using an allen wrench tighten both bolts securely.
With the acorn nut facing up, place the shorter arm on the
left side of the tray and repeat steps 18-19.
20A 20B
19A
19B
Acorn Nut
Short Tray Arm
Long Tray Arm
Mounting
Holes