3
Safety Instructions
•
Please ensure that the voltages of the power supply you are using match with rated working
voltages before operating the machine
•
The power supply should be close to the system for convenient use
•
The power supply should provide reliable protective earthing connection
•
This system must be earthed reliably to ensure the safety of the system during operation
•
Only the operators of this system should operate the electric or motion components/controls
•
Please don’t use damaged wires or sockets
•
Please keep children away from touching and operating this system
•
Please do not spray water or other liquid on the system otherwise electric shock or system
faults could occur
•
Please do not replace the power cord or plugs yourself, do not put heavy objects on the power
lines as this may cause electric shocks
•
During use please take care that no clothes, neckties, hair, necklaces etc are near the system
otherwise injuries could occur
•
Please don’t put burrs, sharp blades or over thick rigid materials between the roller (for example,
tools, rulers and knives etc.)
•
Don’t cut adhesive films directly on the surface of the roller to avoid damage
•
Please shut down the system after laminating
•
At the end of the working day always gape the rollers to ensure no flat spots or distortions occur
•
When you need to move the system, please shut down the power switch and pull out the plugs
•
Please be aware of the location of the wheels during moving or operating this system to avoid
foot injuries
•
Always ensure the system is positioned on a flat and level floor
•
Please shut off the power supply (pull out the power plug) when the system isn’t going to be used
for long periods of time
Environmental Requirements
•
Ambient temperature 10°C - 40°C, humidity 30% - 80%, ideal humidity 55%
•
Dust - Due to the static adherence of the film, you should keep the environment clean.
•
Please do not keep the system in direct sunlight
•
Please do not keep the system in or around dusty areas
•
Enough space should be kept around the system to ensure the secure and effective application
