GENERAL INFORMATION
Easy Heat TSR Cable connection kits are provided in nonme-
tallic NEMA 4X enclosures for use in pipe tracing applica-
tions in ordinary locations and Division 2 hazardous areas
when used with Easy Heat TSR Cable. These kits contain all
necessary components to terminate/connect TSR Cable and
any associated power supply.
TSRP POWER CONNECTION KIT
TSRS SPLICE KIT
TSR Cable Connection Kits Selection Guide
6 TSRP POWER CONNECTION KIT
Installation Instructions
TSRL PILOT CIRCUIT KITS
TSRT TEE SPLICE KIT
The TSRP Power Connection Kit
is suitable for connecting up to
two heating cables to customer
supplied power wiring. Seals
for up to 2 cable ends are also
provided.
Models: TSRP3, TSRP12,
TSRP20.
Kit Contents
1 Universal Base, Box Adapter, Sealing Gasket, and Lock-
nut Assembly
1 Nonmetallic Junction Box with Cover and Sealing Gas-
ket
1 Sealing Grommet
2 Power Terminations
2 Cable End Seals
1 Tube Adhesive Sealant
1 3-point Floating Terminal Block
1 Ground Connection Splice
2 Stainless Steel Pipe Clamps: TSRP3, 3"; TSRP12, 12";
TSRP20, 20"
1 Label
Kit Contents
1 Universal Base, Box Adapter, Sealing Gasket and Lock-
nut
1 Nonmetallic Junction Box with Cover and Sealing Gas-
ket
1 Sealing Grommet
2 Power Terminations
1 Tube Adhesive Sealant
1 3-point Floating Terminal Block
1 Ground Connection Splice
2 Stainless Steel Pipe Clamps: TSRS3, 3"; TSRS12, 12";
TSRS20, 20"
1 Label
The TSRS Splice Connection
Kit is designed for connecting
two heating cables together in
an in-line splice configuration.
Models:TSRS3,TSRS12,TSRS20.
Kit Contents
1 Universal Base, Box Adapter, Sealing Gasket, and Locknut
Assembly
1 Nonmetallic Junction Box with Cover and Sealing Gasket
1 Sealing Grommet
1 Power Termination
1 Tube Adhesive Sealant
1 Ground Connection Splice
2 Stainless Steel Pipe Clamps for pipe size up to 12"
1 Pilot Light Assembly
120 Volt model: TSRL112; 208 Volt model: TSRL812
240 Volt model: TSRL212; 277 Volt model: TSRL712
1 Label
The TSRL Pilot Light Kits are
designed as end-of-circuit indicating
light assemblies utilizing low temper-
ature neon lamps. Kits are available
for 120V, 208V, 240V and 277V op-
eration.Installation of pilot light tail kit
ensures that power is applied to the
entire cable, and that the heating
cable can be expected to operate as
designed. Note that if a thermostat
controls power to the cable, the pilot
light will operate ONLY when the
cable is energized.
Kit Contents
1 Universal Base, Box Adapter, Sealing Gasket and Lock-
nut Assembly
1 Nonmetallic Junction Box with Cover and Sealing Gasket
1 Watertight Connection Fitting with 12" Hi-Temp Flexible
Tubing
1 Sealing Grommet
3 Power Terminations
2 Cable End Seals
1 Tube Adhesive Sealant
1 3-point Floating Terminal Block
1 Ground Connection Splice
2 Stainless Steel Pipe Clamps: TSRT3, 3"; TSRT12, 12";
TSRT20, 20"
1 Label
The TSRT Tee Connection Kit is
designed for connecting heating
cables in a tee splice configura-
tion. Seals for up to 2 cable ends
are also provided.