You have the option of charging the batteries individually.
1.
Turn off the main power.
2.
Flip open the charger port protector on the front of the battery.
3.
Use the secondary charger pigtail to adapt the battery charger to plug into the battery
directly.
◎
More information on the EasyFold PRO 2.0 batteries...
1.
The EasyFold Power Wheelchair comes with two charged 24V 7AH lithium batteries.
2.
Charged the batteries for 3-4 hours for each battery.
3.
Turn the main units’ power off while charging.
4.
Do not leave children unsupervised near the power wheelchair while it is charging.
5.
Do not attempt to open the battery housing.
6.
Red means the power is on and the unit is charging; green means the unit is fully charged.
Note
: this information is also located on the back of the charger.
7.
When the battery is fully charged, remove cable, then take out the DC charging connector
and AC input power socket.
8.
The average time taken to recharge workable batteries will vary from 2 to 8 hours depending
on the level of usage.
9.
Do not charge more than 8 hours.
10.
If you do not operate the EasyFold PRO 2.0 for two months, we recommend that you charge
the battery for 6-8 hours before use.
11.
Overcurrent protection: this system is included on the wheelchair and will shut off the current
from the batteries if triggered, thus shutting the motor down, which will ensure that the motor and
battery do not experience any damage.
12.
The life cycle of a lithium battery is measured in charging cycles with an average of 500
Содержание PRO 2.0
Страница 1: ......
Страница 6: ...Specification Diagram...
Страница 13: ...7 Insert two batteries and push to the back of the battery holder...
