EASYDIVE
di Fabio Benvenuti - Via dell’Industria 13 Int. 6 – 48015 Montaletto di Cervia (RA) -
Tel/Fax + 39 (0)544/962923 cell. + 39 338/9994219 - Web:
www.easydive.it
E-mail: [email protected]
Camera Mode “Manual Mode”
Push Button 1
:
s AF Push button 2: autofocus
Push button 3: aperture -
Push button 4: ap
Push button 5: speed -
Push button 6: speed +
Push button 3 + Push button 5 simultaneously: ISO Setting
Push button 4 + Push button 6 simultaneously: reset board (or mode
change)
Camera Mode “Speed Priority”
Push button 1: s AF
Push button 2: autofocus
Push button 3: exposure compensation - Push button 4: exposure
compen
Push button 5: speed -
Push button 6: speed +
Push button 3 + Push button 5: simultaneously: ISO setting
Push button 4 + Push button 6: simultaneously: Reset board (or mode
change)
Camera Mode “Aperture Priority”
Push button 1: s AF
Push button 2: autofocus
Push button 3: aperture -
Push button 4: ap
Push button 5: exposure compensation - Push button 6: exposure
compen
Push button 3 + Push button 5 simultaneously: ISO setting
Push button 4 + Push button 6 simultaneously: Reset board (or mode
change)
(the commands listed above can vary, increase or being programmed
according to the model of camera used, we suggest to verify always directly
with Easydive which are the commands available for the camera owned)
Optional for Camera Housing
Easyflash, flash Supports
EASY-CARBON, Viewfinder,
second USB Photo Control
keypad, Support pilot light,
Easydome, Flat Port,
Extension 30, Extension 40,
extension 40 zoom, Gear
Zoom.
Warning
1.
Do not leave the housing sealed for long periods of time
2.
Check that the glass of the housing is clean before starting to
film/photograph
3.
Position the camera/video camera following the procedures stated
and always ensuring it is correctly seated before starting to
film/photograph
4.
Always ensure the seals are in excellent conditions
5.
To avoid condensation close the housing in a dehumidified ambient
or use bags of silica gel
6.
Avoid a prolonged exposure of the housing to the sun light before
the dive or cover the housing with a damp cloth.
Ordinary Maintenance
1.
Wash the housing in fresh water after every dive
2.
Check periodically that the seals and their seats are in good condition
3.
Any cleaning of the lenses must be done carefully and without the use of
abrasive pastes
4.
Make a complete maintenance of the O-Ring at least once a year
sending the housing to Easydive (posting fee)
5.
After each use be careful not to bend the wires excessively during the
storing not to compromise the correct functioning
6.
For individual accessories read the specific use and maintenance
instructions
Warranty Conditions
The Warranty EAYDIVE recognised only to the first owner covers this product for
one year from the purchasing date and comprises the substitution under
warranty of the parts resulting faulty from manufacturing or assembly.
At the conditions that:
The product is correctly used and has been serviced in accordance to the
tips and suggestions contained in the present USER & MAINTENANCE
MANUAL.
All non-routine maintenance are exclusively performed by Easydive.
Содержание Leo 2
Страница 1: ......
