AIRFLO 24
11
ENGLISH
Specifications
Airflo 24
Weight:
4.1Kg
Output pressure:
0.31 bar
Batteries:
1 x 24v - 2200mAh Ni-MH Airflo 24 Battery Pack (Mangar Prt No. CD0314)
Battery Life:
500 charging cycles (when used in accordance with battery charging
instructions). For optimal performance, Winncare recommends replacing
batteries every 12 months.
Environmental protection: IP41 (Protection from entry by solid objects with a diameter or
thickness greater than 1.0mm & dripping water)
Type BF equipment
This equipment has been tested and meets the requirements of current EMC legislation
Charger:
Model number
- SP3009SRM
Input:
AC 100v - 240v,
50-60Hz, 0.35A Max
Output:
DC 30v, 0.45A
Class II Double insulated equipment.
Trouble shooting guide
Problem
Remedy
•
Compressor does not run when the 4 way
hand control buttons are pressed.
•
Ensure that the Airflo 24 has been switched
on.
•
Ensure the charger is disconnected from the
Airflo
•
Check that there are no kinks in the air hose.
•
Compressor keeps stopping when trying to
inflate the lifting aid.
•
Check that there are no kinks in the air hose.
•
No Battery status indicator Lights
•
Unit switched off -turn unit on.
•
Thermal fuse on battery has tripped – Allow
unit to cool down 60-90minutes. A solid red
LED will display after temperature normalizes
and fuse resets. This will have reset the
charge sequence.
•
Bottom Battery status indicator solid Red
Light
•
Low Battery Capacity, recharge.
•
Bottom Battery status indicator Flashing Red
every 2 seconds
•
Internal Pump Temperature too high –
allow Airflo to cool down 60-90mins before
attempting a lift.
•
Bottom Battery status indicator flashing Red
every ½ second
•
Battery Voltage low – Re charge. If occurs
repeatedly replace the battery.
•
Compressor causes electrical interference
with another piece of electrical equipment.
•
Move either the compressor or other item
further away from each other until the
interference stops.
Optional Mains Power Adaptor:
Meanwell Switching Adaptor
- GSMZZOA20-R7B
Input:
AC 100v - 240v,
50-60Hz, 4A
Output:
DC 20v, 0.45A
www.easycaresystems.co.uk
