16
Operation
Power button:
Press to turn the unit on or off.
LED Display:
- While on COOL mode shows the set temperature in °C
or °F
- When on FAN and DRY mode shows the room
temperature
- Displays error codes
AUTO mode
- Can only be activated by remote control
- There is no AUTO mode display on the control panel
- Display will show COOL or FAN based on ambient
room temperature
SLEEP mode
- Can only be activated from the remote control
- Conserves energy during sleeping hours
- Once activated, SLEEP mode will increase the set
temperature by 1 degree for 30 minutes. The set
temperature will increase another degree in the next 30
minutes and then will maintain temperature for 7 hours
before returning to the original setting.
- The SLEEP function is only available in COOL mode
Follow Me Function
- Can only be activated from the remote control
- Available in Cool and Auto modes
- Keep the remote control with you and the appliance will
adjust the set temperature based on the temperature at
your current location
- The Follow Me light on the control panel will illuminate
for 5 seconds every three minutes to indicate that it has
received a signal from the remote. If the appliance does
not receive a signal from the remote during any 7 minute
interval, it will beep to indicate that the Follow Me mode
has ended.
Control panel instructions
Содержание EPA080BAUW
Страница 9: ...7 Installation Front Rear Features ...
Страница 13: ...11 Installation Installation in a double hung sash window adapter ...
Страница 14: ...12 Installation Installation in a sliding sash window adapter ...
Страница 34: ...32 Instalación Vista frontal Vista posterior J J J Caracteristicas ...