●
How to operate the product
Turn on the device by spinning one or two spin dials on the side of the unit to click to 1.
Turn on both dials on the side of the device if you want to use both channels for two separate areas. Each
channel has its own intensity level which is adjusted via these separate dial knobs. The screen display will light
up blue, which mesns the EHE010 device is ready to use.
You can choose between auto procedure modes or manual customized modes
i. If you prefer one of the auto-procedure modes (mixture of message types), press the button that matches
your treatment area best such as SHOULDER or JOINT.
ii. If you prefer to customize the massage sensation by yourself, you can choose one of the manual massage
types.
TYPES: MASSAGE, BEAT, or KNEAD labeled as MODE1, MODE2, and MODE3. This will override the
auto-procedure mode.
Scrolling the channel knobs will increase the intensity (strength) individually for channel A and channel B.
Each channel has its own individually intensity knob. The intensity will have a max level of 10. Stay at a level
that is comfortable for you. Then simply enjoy the therapy. The EHE010 device has a default speed, which is
non- adjustable. It remains the same for any given mode and intensity chosen.
There is a default 20-minute countdown timer on the screen. You can tap the “TIMER” button to switch
between 20, 40 and 60 minutes. The device will timeout and turn off after the session.
Quick Tips for Using Display and Adjusting Intensity
•
Scroll Switch Knob to one to turn on corresponding channel A or B.
•
Press one of the mode buttons to start treatment, such as SHOULDER or MODE1.
•
Rotate the Switch Knob to adjust the intensity of either independent channel A, independent channel B, or
both.
•
Press TIMER to adjust the time. Choose from 20, 40, or 60 minutes, let off and press again to get to next time
option. 20 min is the default time.
•
Press LOCK/UNLOCK to lock/unlock the control board. This allows your setting to stay even if you
accidentally press a button.
If you want to conclude the treatment before the timer is up, spin either dial or both dials on each side of unit
to the “OFF” label until you hear a clicking sound.
NOTE: It is recommended to begin treatment from the lowest intensity (1) and then gradually and slowly
adjust to a comfortable level on a scale from level 1 to 10 with 10 being the highest intensity.
NOTE: You may choose to use either the left side or the right side of the unit, or both, but the electrode pads
must be used in pairs to work. Meaning you cannot use one electrode from each side of the unit.
How to Operate EHE010
Auto-Procedure Mode Reference Chart
BUTTON
OUTPUT RESPONSE
BACK (Automatic Mode)
COMBINATION:
BEAT output for 10s,
KNEAD output for 4s, off for 1s,
MASSAGE output for 4s, off for 2.6s,
BEAT output for 10s,
MASSAGE output for 4.5s,off 2.6s,
KNEAD output for 4s, off 1s
ARM-LEG (Automatic Mode)
COMBINATION:
MASSAGE output for 4.5s, off 2.6s,
BEAT output for 10s,
MASSAGE output for 4.5s, off 2.6s,
BEAT output for 10s,
MASSAGE output for 4.5s, off 2.6s
HAND-FOOT (Automatic Mode)
COMBINATION:
MASSAGE outputs for 4.5s, off 2.6s,
BEAT outputs for 10s,
MASSAGE outputs for 4.5s, off 2.6s,
BEAT outputs for 10s,
KNEAD output for 4s, off 1s
SHOULDER (Automatic Mode)
COMBINATION:
BEAT output for 10s
COMBINATION:
BEAT output for 10s
NECK (Automatic Mode)
JOINT (Automatic Mode)
COMBINATION:
BEAT output for 10s,
KNEAD output for 4s, off for 1s,
BEAT output for 10s,
MASSAGE output for 4s, off for 1s,
BEAT output for 10s
4
5
