Pedestal Fan GENERAL INSFORMATION AND SAFETY INSTRUCTIONS
6
AFTER SALES SUPPORT
888-367-7373
GENERAL INFORMATION AND SAFETY INSTRUCTIONS
PLEASE READ AND SAVE ALL INSTRUCTIONS BEFORE USING THE PEDESTAL FAN.
When using an electrical appliance, basic safety precautions should always be observed, including
the following.
1. Always turn the fan off before removing the plug from the outlet.
2. Always turn the fan off and unplug it before cleaning.
3. To protect against electrical hazards, do not place the fan in water or other liquids.
Do not allow the fan to become wet or damp.
4. Do not connect the fan to a power supply until the fan is FULLY assembled.
5. Do not leave the fan unattended when it is plugged in. Turn the fan off when leaving
the fan for an extended period.
6. Use the fan only for its intended use as described in these operating instructions.
7. Do not operate any appliance if its cord or plug is damaged, after the appliance has
malfunctioned, or after it has been dropped or damaged in any way. Always follow
the warranty instructions.
8. Place fan on a dry, flat, level surface to avoid it overturning.
9. Avoid contact with moving parts.
10. Never drop or insert any object into any opening. Do not insert any objects into the
area protected by the wire grills. Do not spray anything into the fan.
11. Do not obstruct the airflow.
12. Do not operate the fan without the wire grills.
13. Close supervision is necessary when any appliance is operated near children.
14. To maintain operating efficiency, do not operate the fan 24 hours a day, seven days a week.
15. Do not run the cord under carpeting or cover with throw rugs, runners or similar coverings, or
under furniture or appliances. Arrange cord away from traffic areas where it will not be tripped
over.
16. This fan employs overload protection (fuse). A blown fuse indicates an overload or short-circuit
situation. If the fuse blows, unplug the fan from the outlet. Replace the fuse (see instructions next
page) and check the fan. If the replacement fuse blows, a short circuit may be present and you
should contact customer service for instructions.
WARNING: To reduce the risk of fire or electrical shock, do not use the fan with any
solid–state speed control device.
THIS APPLIANCE HAS A POLARIZED PLUG (ONE PIN IS WIDER THAN THE OTHER) TO
REDUCE THE RISK OF ELECTRICAL SHOCK. THIS PLUG IS DESIGNED TO FIT IN A
POLARIZED OUTLET ONLY ONE WAY. IF THE PLUG DOES NOT FIT FULLY INTO THE OUTLET,
TRY THE PLUG THE OTHER WAY AROUND. IF THE PLUG STILL DOES NOT FIT, CONTACT A
QUALIFIED ELECTRICIAN. DO NOT ATTEMPT TO ALTER, DISMANTLE OR FIND ANOTHER
WAY AROUND THIS SAFETY FEATURE.
