Assembling the shower chair
USA
AFTER SALES SUPPORT
8
USA
1 800 364 1667
www.royalbeach.de
Assembling the shower chair
1. Fit the rubber feet
6
on the foot tubes
7
.
2. Insert the foot tubes in the seat tubes
9
(see
fig. C).
3. Hold the snap button down and pull the foot tube out to the desired length
(see
fig. C).
4. Make sure that the snap button on the seat tube locks into one of the holes in
the foot tube and that all foot tubes have the same height.
5. Screw the seat tubes and the seat
1
together with a short wing screw
4
and a washer
5
(see
fig. B).
6. Place the back rest tubes
8
on the seat tubes so that the screw holes are
aligned above one another.
7. Screw the back rest tubes tight with the long wing screws
3
and the
washers (see
fig. B).
8. Place the back rest
2
on the back rest tubes so that the screw holes are
aligned above one another.
9. Screw the back rest with the short wing screws and the washers onto the back
rest tubes (see
fig. D).
10. Align the rubber feet so that the shower chair has a solid, secure position.
You can now use the shower chair.
