Fault table
USA
AFTER SALES SUPPORT
23
USA
1 855 754 8297
www.aldi.com
MODEL: 92154 02/2015
Steam Iron
Fault table
Problem
Possible cause
Solution
The soleplate doesn't
heat up although the
iron is on.
Connection problem.
Check the power cord,
plug and socket.
The temperature control
dial is set to 0.
Select a suitable
temperature.
The steam iron does
not produce any
steam.
Not enough water in the
water tank.
Fill the water tank.
The steam control dial
has not been set to
steam production (
).
Set the steam control
dial between minimum
and maximum steam
production.
The selected tempera-
ture is lower than the
required setting for the
steam function.
Set the correct tempera-
ture for steam ironing
( up to
MAX
).
The steam burst func-
tion is not working.
The steam burst function
was used several times
within a short period of
time.
Set the iron down in a
level position and wait
before you use the
steam burst function.
The iron is not hot
enough.
Set the correct tempera-
ture for steam ironing
( up to
MAX
). Set
the iron down so that it
is in a vertical position
and wait until the oper-
ating control light goes
out.
Water may leak out
of the soleplate while
ironing.
The iron is not hot
enough.
Set the correct tempera-
ture for steam ironing
( up to
MAX
). Set
the iron down in a verti-
cal position and wait un-
til the operating control
light goes out.
