Operation
17
1. Set the main power switch
3
to the “
I
” position.
The product emits a beep sound and the power on icon
43
lights up in the
display when the product is connected to mains supply.
2. Press the on/off button
21
/
26
to turn the product on.
The room temperature (°C) shows in the temperature display area
37
.
The flame effect
5
is activated once the product is turned on.
3. Press the heating mode button
25
/
33
repeatedly to cycle through and select
the heating mode (indicated by the heating mode icons
36
).
Press
Heating mode
Heating mode icon
1×
1,000 W (Low power)
2×
1,800 W (High power)
3×
Fan only*
No heating mode icon
*Fan only mode is useful when you want the product to provide ambient light
only without heat generation.
4. If low or high power is selected in the previous step, the desired room temperature
will flash in the temperature display area. Press the + or – button
22
/
34
to set
the desired room temperature (adjustable range: 15–30 °C).
5. Wait a few seconds (without pressing any buttons) until the temperature display
area shows the current room temperature again. The desired room temperature
is now set.
The product starts to heat up when the room temperature is lower than the set
temperature and stops to heat up when the room reaches the set temperature. It
will continuously start or stop heating to maintain the set room temperature.
6. Press the flame effect button
23
/
27
to cycle through and select the brightness
level (5 levels) of the flame effect.
The current brightness level is indicated by the flame brightness icon
41
.
7. To turn the product off, press the on/off button.
8. Set the main power switch to the “
O
” position to completely cut off the mains
supply.
9. Unplug the mains cord when the product is not in use.
• The internal fan may continue to run briefly after the product is
turned off to cool down the product.
• The product can detect possible window opening in the room. When
the room temperature drastically drops by 5–10 °C in a short period of
time, the product automatically turns off to save energy. The window
monitor icon
40
lights up when this feature is activated.
