First use
14
First use
Checking the product and package contents
NOTICE!
Risk of damage!
If you are not cautious when opening the packaging with a sharp
knife or other pointed object, you may quickly damage the product.
− For this reason, be very careful when opening it.
1. Take the product out of the packaging.
2. Check to make sure that all parts are included (see
Fig. A
).
3. Check whether the product or individual parts are damaged. If this is the case, do
not use the product. Contact the manufacturer via the service address indicated
on the warranty card.
Basic cleaning
1. Remove the packaging material and all plastic wrappings.
2. Clean all parts of the product before first use as described in the chapter
“Cleaning”.
Installation
• The product can be mounted on the wall or placed on the floor.
• A crosshead screwdriver
44
is required for the installation.
• An electric drill
45
is required for wall mounting.
Wall mounting
1. Select a wall with sufficient load-bearing capacity for installing the product.
Determine the installation location.
The installation location should be close to a mains socket.
The minimum distance from the floor to the bottom of the product is 60 cm and
the minimum distance from the top of the product to the ceiling is 100 cm.
Ensure there is at least 1.5 m of free space around the product. Keep textiles,
curtains or any other flammable material away from the product.