2019 - Easy Lights GmbH
48
5.2.7
Controlling Easy One
/
Easy Tandem
Figure N - Control keypad Easy One
/
Easy Tandem
When the luminaire is connected to the mains, it changes over to calibration mode for
approx. five seconds. In this mode, the sensors are polled and the internal control is
initialized. After these five seconds, the luminaire can be switched on by pressing the
ON/OFF control key. According to the factory setting, the direct light is directed towards
the table top and the indirect light towards the ceiling. The individual LED groups for
indirect light, direct light and spot light can be activated or deactivated by pressing the
corresponding keys.
When the luminaire is switched off by pressing the ON/OFF control key, the current light
settings are saved and will be restored with the next switch-on. To reset the luminaire and
its functions to the factory settings, simply disconnect it from the mains. For this purpose,
disconnect the power supply unit from the luminaire and wait for approx. five seconds
before re-connecting and switching on the luminaire again.
ON/ OFF
Key for all groups, depending on the user settings
DIMMING -
Dims down the direct light towards the table top
D
Dims up the direct light towards the table top
DIRECT ON / OFF
Key for direct light towards the table top
SPOT ON / OFF
Key for the spot light
INDIRECT ON / OFF
Key for indirect light towards the ceiling
