background image

DAILY SAFETY INSPECTION 

 

Do not operate your EL4 series attachment if you notice any unsafe condition(s) that 
may have been caused by an accident or malfunction. Immediately report this condition 
to your supervisor.  

 

1.

 

Perform a visual inspection, checking for loose or damaged springs and jaws. 

2.

 

Ensure that safety chain is properly attached to carriage.  

3.

 

Ensure locking pins are pushed down and attachment is mounted securely to fork mount 

carriage. (carriage mount models only)  

4.

 

Ensure the operator has read the manual and is properly trained to use the attachment. 

5.

 

Observe the condition of the equipment for any other malfunction or defect. 

 

If any of these tests are failed, tag the unit properly to keep it out of service until the 
problem has been resolved.  

 

 

SAFETY PRACTICES 

 

1.

 

Do not lift loads that exceed the rated capacity of the attachment. 

2.

 

During transportation, the drum(s) should only be lifted to a height that is necessary for 

proper floor clearance.  Be sure the drums do not contact the ground as the attachment is 

designed to release them if they contact the ground. 

3.

 

Keep hands and feet clear of the clamping head, lifting area in front of the attachment and 

the area underneath an elevated drum. 

4.

 

Be certain the clamping head(s) have made a secure connection with the chime of the 

drum before attempting to move or transport a load.  

 

WARNINGS 

 

WARNING:

   Do not lift or suspend loads over people. Stay clear of suspended loads. 

 

WARNING:

   Do not attempt to overload the attachment its rated capacity, or raise the 

drum(s) beyond its maximum lifting height

 

 
WARNING:  

Never transport the attachment at its maximum lifting height

.

 

 

WARNING:

 

 

Keep hands and feet away from the pinch points, mast channels, clamp and 
springs.

 

 

WARNING:

   Do not leave unit outside in rain, snow, etc., for extended periods. 

 

WARNING:

   Never leave the unit unattended with a suspended load. 

 

WARNING:

   Do not make alterations or modifications to the unit without Easy Lift  

 

 

Equipment authorization

 

5

Содержание EAGLE-GRIP EL4 Series





















Отзывы: